Skip to content
JANOVA Access · Intercom
PQ VEP7-CM2 villa video intercom kit Video Intercom
Video Intercom

PQ villa series

PQ VEP7-CM2 Villa Video Intercom Kit

A budget-friendly 7-inch villa kit with physical buttons and simple four-wire wiring.

For villas, townhouses and small gates where a simple, reliable video entry kit is enough. The 7-inch monitor uses physical buttons, and the door station pairs a 700TVL camera with a compact housing.

Villa kitPhysical buttons4-wire
System type
Four-wire villa intercom
Indoor monitor
7-inch, 800 × 480
Indoor size
310 × 80 × 35 mm
Indoor power
AC 100–240 V, DC 15 V 1.2 A

Quick answer

Model PQ VEP7-CM2: Indoor monitor: 7-inch, 800 × 480 · Indoor size: 310 × 80 × 35 mm · Indoor power: AC 100–240 V, DC 15 V 1.2 A. 12 specifications, 5 FAQs. Final configuration and lead time are confirmed from the door list.

  • Model datasheet and wiring diagram with the shipment
  • Project consolidation and sample testing
  • English / Chinese technical support
Overview

The PQ VEP7-CM2 is a four-wire villa kit built around a 7-inch indoor monitor with a 800 × 480 display and physical buttons plus menu selection. That button layout is easier for elderly residents and for installers who want a predictable interface without a touch layer.

The door station uses a 700TVL camera with a 120° angle and a 130 × 50 × 45 mm housing. The indoor monitor is 310 × 80 × 35 mm, runs from AC 100–240 V and supports up to two outdoor units and four indoor units over RVV4 cable up to 150 m. The kit covers a single gate with several indoor points.

This kit is aimed at cost-sensitive villa and townhouse projects that do not need IP networking, app answering or smart-home integration. If the project needs a higher-resolution camera or a touch screen, compare the AHD and IP kits in the same catalogue.

Key features

Video Intercom: what it solves at the door.

7-inch monitor at 800 × 480 with physical buttons

700TVL door camera with 120° angle

Four-wire RVV4 installation up to 150 m

Up to 2 outdoor units and 4 indoor units

Indoor unlock from the monitor

Simple setup for villas and small gates

Specifications

System type Four-wire villa intercom
Indoor monitor 7-inch, 800 × 480
Indoor size 310 × 80 × 35 mm
Indoor power AC 100–240 V, DC 15 V 1.2 A
Operation Physical buttons + menu selection
Cable RVV4, up to 150 m
Outdoor camera 700TVL
Camera angle 120°
Outdoor size 130 × 50 × 45 mm
Operating temperature -40 °C to +60 °C
Maximum combination 2 outdoor units + 4 indoor units
Unlocking Indoor monitor

Typical applications

These are the typical deployment scenarios for this model. Lane count, mounting height and interfaces are confirmed against the site plan.

Selection note

Specifications follow the product documentation; batch or configuration differences may apply. Confirm the model, interfaces and accessory list before ordering.

Selection & installation

Align the configuration and installation conditions.

Selection table — start from the existing cable

Building conditionRecommended system
Existing two-core cable 2-wire kit, RVV2, up to 150 m
Existing four-core cable 4-wire or AHD kit, up to 150 m
Network cable or new build IP system with PoE and app/platform options
Multi-building or long distance IP system with a network backbone
Single villa gate 2-wire or 4-wire villa kit with a 7–10 inch monitor

Installation table — power, cable and commissioning

ItemTypical setting
Power Indoor-powered 2-wire, local 12 V, or PoE for IP
Cable RVV2 / RVV4 / Cat5e per kit; measure the actual route, not the plan
Monitor height 1.4–1.5 m to the screen centre
Unlock Confirm relay rating, lock type and fail-safe mode
Outdoor station Canopy, drip loop, and avoid direct sun on the camera
Test Day/night image, audio, unlock and app connection
Frequently asked questions

Frequently asked questions

Is this kit suitable for an elderly household?

Yes, the physical buttons and menu selection are simple to operate. Place the monitor at a comfortable height and label the main buttons if needed.

Can it support two gates?

The system supports up to two outdoor units and four indoor units. Confirm which gate calls which monitor and how the unlock outputs are wired.

Does it need a network connection?

No. This is a standalone four-wire kit and does not require internet. It is a good fit for sites without network infrastructure.

Can the camera see at night?

The door station is designed for day/night use; confirm the low-light performance and add entrance lighting if the gate is very dark.

What is the maximum cable length?

The kit is specified for up to 150 m over RVV4. Longer runs may need a different cable gauge or system; share the actual distance.

Still have a question? Contact

Request a quote

Ask about the PQ VEP7-CM2 configuration and price.

Tell us the quantity, target country, door type and the controller or platform you use. We will reply with the configuration, accessory list and lead time.

  • Quantity and project stage
  • Target country, voltage and plug type
  • Existing controller, turnstile or platform model

Inquiry: PQ VEP7-CM2

Share the site type, number of doors or apartments, and the functions you need. We will reply with a recommended configuration and a quotation.

By submitting this form you agree that we may contact you about this inquiry. We do not sell your data. Privacy policy

Keep exploring

Need to compare this model inside a full system?

Open an application guide to see where it sits in a real entrance, what it pairs with and what to check before deployment.